Transfer Case Speed Sensor Replacement - Left Rear

Transfer Case Speed Sensor Replacement - Left Rear

Removal Procedure





1. Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle.
2. Disconnect the left rear speed sensor electrical connector (4).





3. Remove the left rear speed sensor.

Installation Procedure





1. Install the left rear speed sensor.
^ Tighten the speed sensor to 15 Nm (11 ft. lbs.).

Notice: Refer to Fastener Notice in Service Precautions.






2. Connect the left rear speed sensor electrical connector (4)
3. Lower the vehicle.