Transfer Case Speed Sensor Replacement - Right Rear

Transfer Case Speed Sensor Replacement - Right Rear

Removal Procedure





1. Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle.
2. Disconnect the right rear speed sensor electrical connector (3).





3. Remove the right rear speed sensor.

Installation Procedure





1. Install the right rear speed sensor.
^ Tighten the speed sensor to 15 Nm (11 ft. lbs.).

Notice: Refer to Fastener Notice in Service Precautions.






2. Connect the right rear speed sensor electrical connector (3).
3. Lower the vehicle.