54. Intake Manifold Disassemble

Intake Manifold Disassemble





1. Remove the vacuum plug (513).





2. Remove the throttle body nuts (503).
3. Remove the throttle body (502) and gasket (501).
4. Discard the gasket.
5. Remove the throttle body studs (504), if required.





6. Remove the oil fill cap (418).
7. Remove the oil fill tube (416) and bolt (419).





8. Remove the bolt and manifold absolute pressure (MAP) sensor.
9. Inspect the MAP sensor grommet for damage.





10. Remove the evaporative emission (EVAP) tube.





11. Remove the EVAP canister purge solenoid valve and bolt.
12. Inspect the O-ring seal for damage. Replace as needed.