79. Water Pump Installation

Water Pump Installation

^ Tools Required
- J 41240 Fan Clutch Remover and Installer





1. Install the water pump and gaskets.





Notice: Refer to Fastener Notice in Service Precautions.

2. Install the water pump bolts.
^ Tighten the water pump bolts (1-4) a first pass in sequence to 25 Nm (18 ft. lbs.).
^ Tighten the water pump bolts (1-4) a final pass in sequence to 50 Nm (37 ft. lbs.).





3. Install the water pump pulley (303) and bolts (302).





4. Use the J 41240 in order to retain the water pump pulley.
^ Tighten the water pump pulley bolts to 25 Nm (18 ft. lbs.).