8. Torque Converter Inspection

Torque Converter Inspection





1. Important: Replace the torque converter if it does not meet specifications.

Measure the OD of torque converter hub (1) at dimension A, the bushing wear area.
^ Dimension A must equal or exceed 58.250 mm (2.293 inch).





2. Measure the distance between the flats of the torque converter hub at dimension A.
^ Dimension A must equal or exceed 51.816 mm (2.040 inch).





3. Measure the OD of the torque converter cover pilot at dimension A.
^ Dimension A must equal or exceed 43.080 mm (1.696 inch).