Scan Tool Data Definitions
Scan Tool Data Definitions
GEN F-Terminal Signal
- The scan tool displays 0-100%. The scan tool displays 0-5% until the engine is running, then the percentage value varies depending on electrical loads.
GEN L-Terminal Signal
- The scan tool displays Voltage/No Voltage. The scan tool displays Voltage until the engine is running, then displays No Voltage when the engine is running.
GEN L-Terminal Signal Command
- The scan tool displays On/Off. The scan tool displays Off until the engine is running, at which time it will display On.
Ignition 1 Signal
- The scan tool displays the current voltage at the battery.