Instrument Panel Trim Pad Replacement

Instrument Panel Trim Pad Replacement

Removal Procedure

Caution: Refer to Restraint System Service Precautions.




1. Disable the SIR. Refer to SIR Disabling and Enabling.
2. Remove the knee bolster trim panel.
3. Remove the instrument panel (I/P) upper trim pad.
4. Remove the screws (1, 3) from the I/P trim pad.
5. Remove the I/P trim pad (2).

Installation Procedure




1. Install the I/P trim pad (2) to the I/P.

Notice: Refer to Fastener Notice.

2. Install the screws (1, 3).

Tighten the screws (1, 3) to 3 N.m (26 lb in).

3. Install the I/P upper trim pad.
4. Install the knee bolster trim panel.
5. Enable the SIR. Refer to SIR Disabling and Enabling.