Instrument Panel Upper Trim Pad Replacement

Instrument Panel Upper Trim Pad Replacement

Removal Procedure

Caution: Refer to Restraint System Service Precautions.




1. Remove the left and right windshield garnish moldings.
2. Remove the instrument panel (I/P) cluster trim plate bezel.
3. Remove the screws (1, 3) from the I/P upper trim pad (2).
4. Lift the I/P upper trim pad (2) on an angle and slide rearward in order to disengage the retainers at front of I/P.
5. Remove the I/P upper trim pad (2) from the vehicle.

Installation Procedure




1. Slide the I/P upper trim pad (2) forward in order to engage the front hooks of the I/P upper trim pad (2) to the I/P carrier.

Notice: Refer to Fastener Notice.

2. Install the I/P upper trim pad screws (1, 3).

Tighten the I/P upper trim pad screws to 3 N.m (18 lb in).

3. Install the cluster trim plate bezel.
4. Install the left and right windshield garnish moldings.