Instrument Cluster / Carrier: Service and Repair

Instrument Cluster Replacement

Removal Procedure

Caution: Refer to Battery Disconnect Caution.

1. Disconnect the battery negative cable.
2. Remove the instrument panel cluster trim plate.
3. Tilt the steering column fully down, if equipped with tilt steering.





4. Remove the screws (2) that retain the instrument cluster to the instrument panel carrier
5. Remove the instrument cluster (1) from the vehicle.

Installation Procedure





1. Position the instrument cluster (1) to the vehicle.

Notice: Refer to Fastener Notice.

2. Install the screws (2) that retain the instrument cluster to the instrument panel carrier.

Tighten the screws to 2 N.m (18 lb in).

3. Install the instrument panel cluster trim plate.
4. Tilt the steering column to the up position, if equipped with tilt steering.
5. Connect the battery negative cable.
6. Refer to Programming and Relearning Programming and Relearning