113. Engine Coolant Thermostat Housing Installation

Engine Coolant Thermostat Housing Installation




1. Install the thermostat housing.

Notice: Refer to Fastener Notice.

2. Install the thermostat housing bolts and nuts.

Tighten the thermostat housing bolts and nuts to 25 N.m (18 lb ft).




3. Install the fuel pipe bracket bolt.

Tighten the fuel pipe bracket bolt to 25 N.m (18 lb ft).




4. Install the water pump inlet pipe.




5. Install the turbocharger coolant outlet hose and clamps.




6. Install the water pump inlet pipe bolts.

Tighten the water pump inlet pipe bolts to 25 N.m (18 lb ft).




7. Install the exhaust gas recirculation (EGR) coolant pipe.
8. Install the EGR coolant pipe bolts.

Tighten the EGR coolant pipe bolts to 25 N.m (18 lb ft).




9. Connect the coolant temperature sensor.




10. Install the oil fill tube.




11. Install the oil fill tube bolts.

Tighten the oil fill tube bolts to 25 N.m (18 lb ft).




12. Install the fuel and electrical harness bracket.
13. Install the fuel and electrical harness bracket bolt.

Tighten the electrical harness bracket bolt to 10 N.m (89 lb in).




14. Connect the turbocharger coolant inlet hose.




15. Connect and install the turbocharger vane position sensor.