Horn Replacement - Right Side

HORN REPLACEMENT - RIGHT SIDE

REMOVAL PROCEDURE
1. Raise and suitably support the vehicle. Refer to Vehicle Lifting.




2. Disconnect the horn electrical connector.
3. Remove the horn bolt. Reposition the park/turn signal lamp wiring harness for additional clearance.
4. Remove the horn (2) from the radiator support (1).

INSTALLATION PROCEDURE

1. IMPORTANT: Ensure that the black side of the horn is facing forward on the vehicle.




Install the horn (2) to the radiator support (1).

2. NOTE: Refer to Fastener Notice.

Install the horn bolt.

Tighten the horn bolts to 9 N.m (80 lb in).

3. Connect the horn electrical connector.
4. Lower the vehicle.