Battery Negative Cable Disconnection and Connection

Battery Negative Cable Disconnection and Connection (Single Battery)

Removal Procedure

Caution: Refer to Battery Disconnect Caution.




1. Record the customer's pre-set radio stations.
2. Turn OFF all the lamps and accessories.
3. Turn the ignition OFF.
4. Loosen the negative battery cable bolt.
5. Remove the negative battery cable.

Installation Procedure

Caution: Refer to Battery Disconnect Caution.

Important: Clean any existing corrosion from the battery terminal bolt flange and battery cable end.




1. Install the negative battery cable.

Notice: Refer to Fastener Notice.

2. Tighten the negative battery cable bolt.

Tighten the bolt to 17 N.m (13 lb ft).

3. Re-set the customer's radio stations.