51. Steel 4-5-6 Clutch Plate Inspection

Steel 4-5-6 Clutch Plate Inspection





1. Important:
^ Measure as described below at a minimum of 3 locations.
^ Replace any 4-5-6 clutch steel plate that does not meet specifications.

Measure the thickness of each 4-5-6 clutch steel plate (1) at dimension A.

The 4-5-6 clutch steel plate minimum thickness is 2.135 mm (0.0841 inch).





2. Important:
Check the steel plates for coning on a level surface.

Measure the cone of each 4-5-6 clutch steel plate (1) at dimension A.

The 4-5-6 clutch steel plate maximum cone is 0.240 mm (0.0094 inch).