Front Side Door Window Weatherstrip Replacement

FRONT SIDE DOOR WINDOW WEATHERSTRIP REPLACEMENT

REMOVAL PROCEDURE
1. Remove the door trim panel.
2. Remove the water deflector
3. Remove the window.




4. Remove the screws.
5. Pull the weatherstrip from the following locations:
- The front of the glass run channel
- The top of the window frame flange
- The rear of the glass run channel

6. Remove the weatherstrip from the door.

INSTALLATION PROCEDURE




1. Install the weatherstrip to the following locations:
- The front of the glass run channel
- The top of the window frame flange
- The rear of the glass run channel

2. NOTE: Refer to Fastener Notice.

Install the bolts.

Tighten to 6 N.m (53 lb in).

3. Install the window.
4. Install the water deflector.
5. Install the door trim panel.
6. Inspect operation of window.