115. Output Speed Sensor Installation

Output Speed Sensor Installation (2WD)

Tools Required

^ J 36850 Transjel(r) Lubricant





1. Install the vehicle speed sensor O-ring (3) onto the output speed sensor (OSS) (2).
2. Apply J 36850 to the O-ring (3).
3. Install the OSS (2) into the low and reverse clutch housing, 2WD.

4. Notice:
Refer to Fastener Notice in Service Precautions.

Install the vehicle speed sensor bolt (1) into the low and reverse clutch housing, 2WD.

Tighten the bolt to 12 Nm (108 inch lbs.).