With Manual Transmission

Engine Flywheel Cleaning and Inspection (Manual Transmission)

1. Important: In order to maintain the proper component balance, contact surface taper, and heat transfer, manual transmission flywheels are NOT to be machined.

Clean the engine flywheel in solvent.

2. Caution: Refer to Safety Glasses Caution.

Dry the engine flywheel with compressed air.





3. Inspect the manual transmission engine flywheel for the following conditions:
^ Pitted surface (1)
^ Scoring or grooves (2)
^ Rust or other surface damage (3)
^ Damaged ring gear teeth (4)
^ Loose or improperly positioned ring gear The ring gear has an interference fit onto the engine flywheel and should be positioned completely against the flange of the engine flywheel.