56. Water Crossover Cleaning and Inspection

Water Crossover Cleaning and Inspection

Cleaning Procedure





1. Clean the engine coolant crossover (308) and water outlet (311) in solvent.

2. Caution: Refer to Safety Glasses Caution.

Dry the components with compressed air.

Inspection Procedure





1. Inspect the engine coolant crossover (308) for the following conditions:
^ Corrosion or damage to the gasket sealing surfaces
^ Corrosion or damage to the thermostat bypass hose fitting
^ Corrosion or damage to the heater hose fitting
^ Corrosion or damage to the threads of the water outlet
2. Inspect the water outlet (311) for corrosion or damage.