69. Oil Pump Cover and Body Assemble

Oil Pump Cover and Body Assemble

Tools Required

^ J 21368 Pump Body and Cover Alignment Band





1. Place the oil pump cover onto the oil pump body and put stator shaft through a hole in the bench.
2. Install the pump cover bolts (233) finger tight only.





3. Install the J 21368.

4. Notice:
Refer to Fastener Notice.

Tighten the pump cover bolts (233).

Tighten the bolts to 24 Nm (18 ft. lbs.).

5. Remove the J 21368.