Brace Replacement - Front Bumper

Brace Replacement - Front Bumper


Removal Procedure





1.Remove the brace bolt (2) from the front bumper.

2.Remove the brace bolt (3) from the outboard mounting brace plate.

3.Remove the brace (1) from the vehicle.

Installation Procedure





1.Install the brace (1) to the vehicle.

Notice:Refer to Fastener Notice .

2.Install the 3 bolts that retain the brace to the bumper and the outboard brace plate.

Tighten
-Tighten the front bumper brace bolt (2) to 15 N �m (11 lb ft).

-Tighten the front bumper outboard brace plate bolt (3) to 9 N �m (80 lb in).