Digital Radio Antenna Replacement

Digital Radio Antenna Replacement

Removal Procedure

Notice: DO NOT apply paint or clear coat to the antenna. This will damage the function of the antenna, causing poor reception or loss of signal reception.

Notice: Use care when removing or installing the headliner. Excessive bending will damage the headliner.

1. Lower the front part of the headliner. Refer to Headlining Trim Panel Replacement.




2. Disconnect the cables (4) from the antenna base (1).
3. Remove the bolt (3) and expansion sleeve (2).
4. Remove the antenna base (1) from the roof.

Installation Procedure




1. Place the antenna base to the roof opening.

Notice: Refer to Fastener Notice.

2. Install the expansion sleeve (2) and the bolt (3).

Tighten the nut to 6 N.m (53 lb in).

3. Connect the antenna cables (4).
4. Install the headliner.