Console Replacement (w/Console Mounting)
Console Replacement (w/Console Mounting)
Removal Procedure
1. Remove both front seats. Refer to Front Seat Replacement - Bucket .
2. If equipped with a Bose(R) amplifier, remove the radio amp fuse located under the hood electrical center. Refer to Electrical Center Identification Views .
3. Remove the upper console bezel. Refer to Floor Console Bezel Replacement (Luxury Upper) Floor Console Bezel Replacement (Non-Luxury Lower) Floor Console Bezel Replacement (Non-Luxury Upper) .
4. Remove the cupholder. Refer to Front Floor Console Cup Holder Replacement (Luxury) Front Floor Console Cup Holder Replacement (Non-Luxury) .
5. Remove the screws (1) retaining the console to the instrument panel (I/P).
6. Disconnect the wire connectors.
7. Remove the console assembly from the vehicle.
8. Remove the rear seat audio control from the console, if equipped. Refer to Rear Seat Audio Control Replacement .
Installation Procedure
1. Install the rear seat audio control to the console, if equipped. Refer to Rear Seat Audio Control Replacement .
2. Install the console in the vehicle.
3. Connect the wire connectors.
4. Move the console forward in order to install the retaining screws.
Notice: Refer to Fastener Notice .
5. Install the 2 screws (1).
Tighten the screws to 4 N.m (35 lb in).
6. Install the cupholder to the console. Refer to Front Floor Console Cup Holder Replacement (Luxury) Front Floor Console Cup Holder Replacement (Non-Luxury) .
7. Install the upper console bezel. Refer to Floor Console Bezel Replacement (Luxury Upper) Floor Console Bezel Replacement (Non-Luxury Lower) Floor Console Bezel Replacement (Non-Luxury Upper) .
8. Install the radio amp fuse, if removed. Refer to Electrical Center Identification Views .
9. Install both front seats. Refer to Front Seat Replacement - Bucket .