Rear Quarter Trim Panel Replacement (Extended Cab)

Rear Quarter Trim Panel Replacement (Extended Cab)

Removal Procedure

1. Remove the rear seat, if necessary. Refer to Rear Seat Replacement (60/40 Split) Rear Seat Replacement (Extended Cab) Rear Seat Replacement (Extended Cab w/4th Door) .
2. Remove the rear window molding. Refer to Rear Window Lower Garnish Molding Replacement .




3. Remove the armrest screw.




4. Remove the armrest.
5. Remove the sill trim plates. Refer to Front Side Door Sill Plate Replacement .




6. Remove the quarter panel trim screws.
7. Pull the panel out, and remove the seat belt assembly. Refer to Rear Seat Belt Retractor Replacement (Crew Cab) Rear Seat Belt Retractor Replacement (Extended Cab) .
8. Remove the quarter panel from the vehicle.



Installation Procedure

1. Install the seat belt assembly. Refer to Rear Seat Belt Retractor Replacement (Crew Cab) Rear Seat Belt Retractor Replacement (Extended Cab) .
2. Install the quarter panel to the vehicle.





Notice: Refer to Fastener Notice .

3. Install the quarter panel trim screws.

Tighten the quarter panel trim screws to 2 N.m (18 lb in).

4. Install the sill trim plates. Refer to Front Side Door Sill Plate Replacement .




5. Install the armrest.




6. Install the armrest screw.

Tighten the armrest screw to 2 N.m (18 lb in).

7. Install the rear window molding. Refer to Rear Window Lower Garnish Molding Replacement .
8. Install the rear seat if necessary. Refer to Rear Seat Replacement (60/40 Split) Rear Seat Replacement (Extended Cab) Rear Seat Replacement (Extended Cab w/4th Door) .