Front Seat Trim Panel Replacement

Front Seat Trim Panel Replacement

Removal Procedure

1. Ensure the seat is in the full upward position.




2. Remove the screws retaining the seat back release handle and the seat recliner handle, if equipped.
3. Remove the trim panel (1) by pulling outward in order to disengage the retaining clip.
4. Remove the trim panel from the seat.



Installation Procedure

1. Position the trim panel on the seat from the front to the back.
Notice: Refer to Fastener Notice .






2. Instal the trim panel (1) to the seat by pushing in until the retaining clips are locked in place.
3. Install the screws retaining the seat back release handle and the seat recliner handle to the seat, if removed.

Tighten the screws to 2 N.m (18 lb in).