Battery Cable: Service and Repair

Battery Negative Cable Disconnection and Connection

Removal Procedure

Caution: Refer to Battery Disconnect Caution.




1. Record all of the customers radio station presets.
2. Turn OFF all the lamps and accessories.
3. Ensure the ignition switch is in the OFF position and the key is removed.
4. From inside the vehicle, remove the battery cover screw and cover.




5. Loosen the negative battery cable terminal (1) nut.
6. Remove the negative battery cable from the battery negative terminal (2).
7. Reposition the negative battery cable away from the battery negative terminal.

Installation Procedure




1. Position and install the negative battery cable to the battery negative terminal (2).

Notice: Refer to Fastener Notice.

2. Tighten the negative battery cable terminal (1) nut.

Tighten the nut to 9 N.m (80 lb in).




3. Install the battery cover and screw.

Tighten the screw to 1.6 N.m (14 lb in).

4. Reset all of the customers radio station presets.