Radiator Cooling Fan: Service and Repair

Fan Replacement (LLV - 2.9L, LLR - 3.7L)

Tools Required
* J 41240-5A Fan Clutch Wrench
* J 46406 Fan Clutch Remover and Installer

Removal Procedure

1. Remove the fan shroud. Refer to Fan Shroud Replacement (LLV - 2.9L, LLR - 3.7L) (Service and Repair).




2. Install the J 46406 and the J 41240-5A to the fan clutch.




3. Remove the fan hub nut in a counterclockwise rotation.

Installation Procedure





Caution: Do not use or attempt to repair a damaged cooling fan assembly. Replace damaged fans with new assemblies. An unbalanced cooling fan could fly apart causing personal injury and property damage.

1. Install the J 46406 and the J 41240-5A to the fan clutch.

Notice: Refer to Fastener Notice (Fastener Notice).

2. Install the fan hub nut to the pulley and hand tighten in a clockwise rotation.

Tighten the fan clutch nut clockwise to 56 N.m (41 lb ft).

3. Install the fan shroud. Refer to Fan Shroud Replacement (LLV - 2.9L, LLR - 3.7L) (Service and Repair).