Reverse Input Clutch Plate Travel Check

Reverse Input Clutch Plate Travel Check




1. Apply an evenly distributed load to the clutch pack.
2. Use feeler gages to check the reverse input clutch plate travel.
3. Check the travel between the selective backing plate and the reverse input clutch retainer ring.

The reverse input clutch plate travel should be 1.02-2.01 mm (0.040-0.079 in).

4. Select the proper selective backing plate to obtain the correct travel. Refer to Reverse Input Clutch Backing Plate Selection (Reverse Input Clutch Backing Plate Selection) .