Front Door Striker: Service and Repair

Door Striker Replacement

Removal Procedure




1. Mark the position of the door striker with a grease pencil.
2. Remove the screw retaining the door striker to the body.
3. Remove the door striker from the body.

Installation Procedure




1. Install the door striker to the body.
2. Align the lock striker to the alignment marks.

Notice: Refer to Fastener Notice (Fastener Notice) .

3. Install the door striker screws to the body.

Tighten the door striker screws to 25 N.m (18 lb ft).

4. Adjust the lock striker if required. Refer to Door Lock Striker Adjustment (Adjustments) .