Heater Inlet Pipe Replacement

Heater Inlet Pipe Replacement

Tools Required

J 38185 Hose Clamp Pliers

Removal Procedure

1. Drain the engine cooling system. Refer to Cooling System Draining and Filling (Static Fill) (Service and Repair)Cooling System Draining and Filling (Vac N Fill) (Service and Repair) .
2. Using the J 38185, reposition the heater hose outlet clamp from the heater pipe inlet.
3. Remove the heater hose outlet from the heater pipe inlet.
4. Remove the exhaust heat sheild. Refer to Exhaust Manifold Heat Shield Replacement (LLV - 2.9L) (Exhaust Manifold Heat Shield Replacement)Exhaust Manifold Heat Shield Replacement (LLR - 3.7L) (Exhaust Manifold Heat Shield Replacement) .




5. Remove the heater inlet pipe bolt.
6. Remove the heater inlet pipe.

Installation Procedure




1. Apply sealant GM P/N 12346004 (Canadian P/N 10953480) or equivalent to the heater outlet hose fitting threads.

Notice: Refer to Fastener Notice.

2. Install the heater outlet hose fitting.

Tighten the heater outlet hose fitting to 45 N.m (33 lb ft).

3. Install the heater hose outlet to the heater pipe inlet.
4. Using the J 38185, reposition the heater hose outlet clamp to the heater pipe inlet.
5. Install the exhaust heat sheild. Refer to Exhaust Manifold Heat Shield Replacement (LLV - 2.9L) (Exhaust Manifold Heat Shield Replacement)Exhaust Manifold Heat Shield Replacement (LLR - 3.7L) (Exhaust Manifold Heat Shield Replacement) .
6. Fill the engine cooling system. Refer to Cooling System Draining and Filling (Static Fill) (Service and Repair)Cooling System Draining and Filling (Vac N Fill) (Service and Repair) .