Seat Cushion Outer Trim Panel Replacement

Seat Cushion Outer Trim Panel Replacement

Removal Procedure

1. Remove the trim panel from the power seat by performing the following:

1. Remove the 3 seat switch bezel mounting screws.




2. Remove the 3 trim panel retaining screws.

2. Remove the trim panel from the manual seat by performing the following steps:

1. Remove the lumbar support knob.
2. Remove the seat back recliner handle.




3. Remove the screws from the trim panel.

3. Remove the trim panel from the seat assembly.

Installation Procedure

1. Install the trim panel to the power seat by performing the following steps:




1. Align the trim panel to the seat assembly.

Notice: Refer to Fastener Notice.

2. Install the screws retaining the trim panel to the seat assembly.

Tighten the trim panel screws to 3 N.m (26 lb in).

3. Install the 3 seat switch bezel mounting screws.

Tighten the seat switch bezel mounting screws to 3 N.m (26 lb ft).

2. Install the trim panel to the manual seat by performing the following steps:




1. Install the screws in the trim panel.
2. Install the lumbar support knob.
3. Install the seat back recliner handle.