Battery Cable: Service and Repair

Battery Negative Cable Disconnection and Connection

Disconnecting Procedure

Caution: Refer to Battery Disconnect Caution.




1. Record all preset and theft codes from the radio.
2. Turn the ignition switch to the LOCK position.
3. Verify that all the electrical components are off such as interior lights, all doors are closed, the underhood lamp, etc.
4. Loosen the negative battery cable bolt.
5. Remove the negative battery cable (2) from the battery.
6. Position the negative battery cable away from any body ground.

Connecting Procedure




1. Verify that all electrical components are off such as interior lights, all doors are closed, the underhood lamp, etc.
2. Clean any corrosion from the negative battery cable using a wire brush.
3. Position the negative battery cable (2) to the battery.

Notice: Refer to Fastener Notice.

4. Tighten negative battery cable bolt.

Tighten the bolt to 15 N.m (11 lb ft).