Body Side Rear Upper Garnish Molding Replacement

Body Side Rear Upper Garnish Molding Replacement

Removal Procedure

1. Remove the upper pillar garnish molding.




2. Grasp and pull the upper pillar garnish molding away from the body in order to release the clips.
3. Disconnect the tether clip from the molding, if equipped.
4. Remove the upper pillar garnish molding from the vehicle.
5. Inspect the front door upper pillar garnish molding for broken or missing clips.

Installation Procedure




1. Align the upper pillar garnish molding retainers to the body.
2. Install the tether clip to the molding, if equipped.
3. Push the upper pillar garnish molding towards the body to engage the clips.
4. Install the upper pillar garnish molding.