Heater Coolant Heater Combustion Sensor Replacement

Heater Coolant Heater Combustion Sensor Replacement

Tools Required

J-38125 Terminal Repair Kit

Removal Procedure

1. Remove the heater coolant heater.
2. Remove the heater coolant heater control unit.






Important: Note the routing of the wiring to ensure proper installation.

3. Using J-38125-560 remove the coolant heater combustion sensor wiring from the electrical connector.
4. Remove the coolant heater combustion sensor from the coolant heater.

Installation Procedure






Notice: Refer to Component Fastener Tightening Notice.

1. Install the heater coolant heater combustion sensor to the coolant heater.

Tighten to 2.5 N.m (22 lb in).

2. Install the heater coolant heater combustion sensor wiring to the electrical connector.
3. Install the heater coolant heater control unit.
4. Install the heater coolant heater.
5. Lower the vehicle.