Windshield Wiper Motor Replacement

Windshield Wiper Motor Replacement

Tools Required

* J39232 Wiper Transmission Separator
* J39529 Wiper Transmission Installer

Removal Procedure





1. Remove the wiper arms.
2. Remove the air inlet grille panel.
3. Remove the wiper transmission.





4. Remove the 2 bolts retaining the wiper motor.
5. Remove the wiper motor from the wiper transmission.

Installation Procedure

Notice: Refer to Fastener Notice.





1. Install the wiper motor onto the wiper transmission with the 2 bolts.

Tighten to 8 N.m (71 lb in).





2. Install the wiper transmission assembly.
3. Install the air inlet grille panel.
4. Install the wiper arms.
5. Operate the wipers and inspect for proper operation.