Front Side Door Replacement - I

Front Side Door Replacement

Removal Procedure




1. Remove the Trim Panel.
2. Disconnect the electrical connectors in the hinge pillar for the door wire harness.
3. Push the rubber conduit out from the hinge pillar in order to remove the rubber conduit from the hinge pillar.
4. Remove the wire harness from the hinge pillar.
5. Remove the check link from the hinge pillar.
6. Remove the hinge pins (2) from the door.
7. With an assistant, remove the door from the vehicle.

Installation Procedure




1. With an assistant, install the door to the vehicle.
2. Install the hinge pins (2) to the door.
3. Install the check link to the hinge pillar.
4. Install the wire harness to the hinge pillar.
5. Push the rubber conduit into the hole in the hinge pillar.
6. Connect the electrical connectors for the front door wire harness.
7. Install the Trim Panel.