Front Suspension

Wheel Stud Replacement

Tools Required

J 43631 Ball Joint Remover


Removal Procedure

1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
2. Remove the tire and wheel. Refer to Tire and Wheel Removal and Installation (Service and Repair) .
3. Remove the brake rotor. Refer to Front Brake Rotor Replacement (JH6, JH7) Front Brake Rotor Replacement (JD9, JF3, JF7) .




4. Use the J 43631 to press the stud from the wheel bearing/hub.



Installation Procedure





1. Install a new stud. Use washers and a wheel nut and pull the new stud into the hub.
2. Install the brake rotor. Refer to Front Brake Rotor Replacement (JH6, JH7) Front Brake Rotor Replacement (JD9, JF3, JF7) .
3. Install the tire and wheel. Refer to Tire and Wheel Removal and Installation (Service and Repair) .
4. Lower the vehicle.