Output Speed Sensor Installation

Output Speed Sensor Installation (2WD)

Tools Required

J 36850 Transjel(R) Lubricant





1. Install the vehicle speed sensor O-ring (3) onto the output speed sensor (OSS) (2).
2. Apply J 36850 to the O-ring (3).
3. Install the OSS (2) into the low and reverse clutch housing, 2WD.

Notice: Refer to Fastener Notice .

4. Install the vehicle speed sensor bolt (1) into the low and reverse clutch housing, 2WD.

Tighten the bolt to 12 N.m (108 lb in).