Fuel Rail Fuel Feed Pipe Replacement - Right

Fuel Rail Fuel Feed Pipe Replacement - Right Side

Removal Procedure




1. Remove the fuel feed pipe.
2. Remove the exhaust gas recirculation (EGR) valve cooler.

Important: Engine wiring harness shown removed for clarity.

3. Remove the fuel rail fuel feed pipe clamp bolts (2 and 3) and upper clamps.
4. Loosen the fuel rail fuel feed pipe fitting (1) at the left fuel rail.
5. Loosen the fuel rail fuel feed pipe fitting (4) at the right fuel rail.




6. Remove the right fuel rail fuel feed pipe.

Installation Procedure




1. Position and install the right fuel rail fuel feed pipe.






Notice: Refer to Fastener Notice.

2. Install the fuel rail fuel feed pipe upper clamps and bolts (2 and 3).

Tighten the bolts to 24 N.m (18 lb ft).

3. Tighten the fuel rail fuel feed pipe fitting (4) at the right fuel rail.

Tighten the fitting to 41 N.m (30 lb ft).

4. Tighten the fuel rail fuel feed pipe fitting (1) at the left fuel rail.

Tighten the fitting to 41 N.m (30 lb ft).

5. Install the EGR valve cooler.
6. Install the fuel feed pipe.
7. Prime the fuel system. Refer to Fuel System Priming.
8. Start the engine. If the engine stalls, repeat the above step.
9. Once the engine starts, inspect for fuel leaks.