105. Valve Rocker Arm Cover Installation - Lower Left Side

Valve Rocker Arm Cover Installation - Lower Left Side






Important: The gasket may be reused if it is not torn, cracked, stretched, or swollen.


1. Install the lower valve rocker arm cover.





Notice: Refer to Fastener Notice .

2. Install the lower valve rocker arm cover bolts.

* Tighten the lower valve rocker arm cover bolts in the proper sequence to 10 N.m (89 lb in).
* Retighten the lower valve rocker arm cover bolts in the proper sequence to the same torque, 10 N.m (89 lb in).