Symptoms - Object Detection

Symptoms - Object Detection

Important: The following steps must be completed before using the symptoms tables.

1. Perform the Diagnostic System Check - Vehicle before using the Symptom Tables in order to verify that all of the following are true:

* There are no DTCs set.
* The control modules can communicate via the serial data link. Initial Inspection and Diagnostic Overview

2. Review the system operation in order to familiarize yourself with the system functions. Refer to Object Detection Description and Operation.

Visual/Physical Inspection

* Inspect for aftermarket devices which could affect the operation of the system.
* Inspect the easily accessible or visible system components for obvious damage or conditions which could cause the symptom.
* Make sure the rear parking assist sensors located on the vehicle rear bumper are clear. Remove any snow, mud or ice that is blocking the sensors.

Intermittent

Faulty electrical connections or wiring may be the cause of intermittent conditions. Refer to Testing for Intermittent Conditions and Poor Connections in Diagnostic Aids. Component Tests and General Diagnostics

Symptom List

* Information Center Telltale Malfunction
* Rear Vision Camera System Malfunction