Torsion Bars Bushing Replacement

Torsion Bars Bushing Replacement

Removal Procedure


Important: This procedure requires the removal of both torsion bars.


1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
2. Remove the torsion bars. Refer to Torsion Bar and Support Assembly Replacement (Bushing Style) (Torsion Bar and Support Assembly Replacement (Bushing Style))Torsion Bar and Support Assembly Replacement (Link Style) (Torsion Bar and Support Assembly Replacement (Link Style)) .
3. Remove the bushing from the bracket utilizing a bushing driver or the equivalent.



Installation Procedure

1. Install the bushing to the bracket utilizing a bushing driver or the equivalent.
2. Install the torsion bars. Refer to Torsion Bar and Support Assembly Replacement (Bushing Style) (Torsion Bar and Support Assembly Replacement (Bushing Style))Torsion Bar and Support Assembly Replacement (Link Style) (Torsion Bar and Support Assembly Replacement (Link Style)) .
3. Remove the safety stands.
4. Lower the vehicle.
5. Measure the Z height. Refer to Trim Height Inspection (Trim Height Inspection) .
6. Turn the adjustment bolt clockwise to increase the Z height and counterclockwise to lower the Z height.