Shift Linkage: Service and Repair

Automatic Transmission Range Selector Lever Replacement

Removal Procedure

1. Raise the vehicle. Refer to Lifting and Jacking the Vehicle .




2. Remove the range selector lever cable heat shield bolts (1).
3. Remove the range selector lever cable heat shield (2).




4. Disconnect the range selector lever cable (2) from the range select lever.
5. Remove the range selector lever cable retainer (1).
6. Remove the range selector lever cable (2) from the cable bracket.




7. Remove the range selector lever nut (1).
8. Remove the range selector lever (2).



Installation Procedure





1. Install the range selector lever (2).
2. Install the range selector lever nut (1).
Notice: Refer to Fastener Notice .



Tighten the nut to 25 N.m (18 lb ft).





3. Install the range selector lever cable (2) to the cable bracket.
4. Install the range selector lever cable retainer (1).
5. Connect the range selector lever cable (2) to the range select lever.




6. Install the range selector lever cable heat shield (2).
7. Install the range selector lever cable heat shield bolts (1).

Tighten the bolts to 17 N.m (13 lb ft).

8. Lower the vehicle.