Steering Damper: Service and Repair

Steering Linkage Shock Absorber Replacement

Tools Required

J 24319-B Steering Linkage and Tie Rod Puller


Removal Procedure

1. Remove the engine shield, if equipped. Refer to Engine Shield Replacement .





Important: Discard the steering linkage shock absorber nut.


2. Remove the steering linkage shock absorber nut (1) from the steering linkage shock absorber (2).




3. Remove the steering linkage shock absorber from the relay rod using puller J 24319-B .





Important: Discard the steering linkage shock absorber nut.


4. Remove the steering linkage shock absorber bolt (2) and nut (3).
5. Remove the steering linkage shock absorber (1) from the vehicle.
6. Inspect the following parts:

* The steering linkage shock absorber for leaks and damage
* The steering linkage shock absorber bolt for damage or corrosion




Installation Procedure






Important: Use new steering linkage shock absorber nuts.


1. Install the steering linkage shock absorber (2) to the vehicle.
2. Install the steering linkage shock absorber (4) and nuts (1, 3).

Notice: Refer to Fastener Notice .

3. Tighten the steering linkage shock absorber nuts (1, 3).

Tighten the nuts to 40 N.m (30 lb ft).

4. Install the engine shield, if equipped. Refer to Engine Shield Replacement .