Discharge Hose Replacement
Discharge Hose Replacement
Tools Required
J 39400-A Halogen Leak Detector
Removal Procedure
1. Recover the refrigerant. Refer to Refrigerant Recovery and Recharging (Refrigerant Recovery and Recharging).
2. Remove front facia. Refer to Front Bumper Fascia Replacement (Acadia) (Front Bumper Fascia Replacement)Front Bumper Fascia Replacement (Enclave) (Front Bumper Fascia Replacement)Front Bumper Fascia Replacement (OUTLOOK) (Front Bumper Fascia Replacement)Front Bumper Fascia Replacement (Traverse) (Front Bumper Fascia Replacement)
3. Remove front bumper upper fascia support. Refer to Front Bumper Fascia Upper Support Replacement (Enclave) (Front Bumper Fascia Upper Support Replacement)Front Bumper Fascia Upper Support Replacement (Outlook, Acadia) (Front Bumper Fascia Upper Support Replacement)
4. Remove the electrical connector from the A/C pressure switch.
5. Remove the discharge line bolt from the A/C compressor (1).
6. Disconnect the discharge line from the A/C compressor (3).
7. Remove the discharge line to condenser bolt (1).
8. Disconnect the discharge line from the condenser (3).
9. Remove the discharge line.
10. Remove the A/C pressure switch. Refer to Air Conditioning (A/C) Refrigerant Pressure Sensor Replacement (Service and Repair).
11. Remove and discard the discharge line O-rings (2).
Installation Procedure
1. Install new O-rings to the discharge line (2). Refer to O-Ring Replacement (O-Ring Replacement).
2. Install the A/C pressure switch. Refer to Air Conditioning (A/C) Refrigerant Pressure Sensor Replacement (Service and Repair).
3. Connect the discharge line to the condenser (3).
Caution: Refer to Fastener Caution (Fastener Caution).
4. Install the discharge line to condenser bolt (1).
Tighten the bolt to 9 Nm (80 lb in).
5. Connect the discharge line to the A/C compressor (3).
6. Install the discharge line bolt to the A/C compressor (1).
Tighten the bolt to 9 Nm (80 lb in).
7. Install front bumper upper fascia support. Refer to Front Bumper Fascia Upper Support Replacement (Enclave) (Front Bumper Fascia Upper Support Replacement)Front Bumper Fascia Upper Support Replacement (Outlook, Acadia) (Front Bumper Fascia Upper Support Replacement)
8. Install front facia. Refer to Front Bumper Fascia Replacement (Acadia) (Front Bumper Fascia Replacement)Front Bumper Fascia Replacement (Enclave) (Front Bumper Fascia Replacement)Front Bumper Fascia Replacement (OUTLOOK) (Front Bumper Fascia Replacement)Front Bumper Fascia Replacement (Traverse) (Front Bumper Fascia Replacement)
9. Evacuate and recharge the refrigerant system. Refer to Refrigerant Recovery and Recharging (Refrigerant Recovery and Recharging).
10. Leak test the fittings of the component using J 39400-A .