Operation CHARM: Car repair manuals for everyone.

Engine Control Module Programming and Setup




Engine Control Module Programming and Setup (2.9L and 3.7L)

The following service procedures require either a programming or a setup event be performed for a complete repair.

ECM Replacement

Warning

Replacement or reprogramming of the ECM, or replacement of the clutch pedal position sensor (CPPS) or clutch pedal requires that a CPPS learn procedure be performed. Failure to perform the CPPS learn procedure may result in personal injury or damage to the vehicle or its components if the vehicle is in gear and the starter motor is accidentally engaged.

If the engine control module (ECM) is replaced, the following procedures must be performed:

1. ECM Reprogramming-Programming and Relearning
2. Clutch pedal position sensor learn-Refer to Clutch Pedal Position Sensor Learn (Programming and Relearning).
3. Crankshaft Position (CKP) Variation Learn-Refer to Crankshaft Position System Variation Learn (Service and Repair) for 2.9L engine or Crankshaft Position System Variation Learn (Service and Repair) for 3.7L engine.
4. Engine Oil Life Remaining-When available, use a scan tool to reset the Engine Oil Life Remaining back to the original percentage recorded before the module was replaced.
5. Transmission Fluid Life Remaining-When available, use the scan tool to reset the Transmission Fluid Life Remaining back to the original percentage recorded before the module was replaced.
6. Theft Deterrent-Refer to Immobilizer System Component Programming (North America, except Canada) (Programming and Relearning)Immobilizer System Component Programming (Canada, Europe, Middle East, and Asia) (Programming and Relearning).

ECM Reprogramming

If the ECM needs to be reprogrammed, Programming and Relearning

Setup for Component Replacement

The replacement of some components will require a setup procedure for complete repair.

If any of the following components are replaced, a CKP Variation Learn Procedure must be performed. Refer to Crankshaft Position System Variation Learn (Service and Repair) for 2.9L engine or Crankshaft Position System Variation Learn (Service and Repair) for 3.7L engine.

* Engine replacement
* Any engine repair that disturbs the CKP sensor or it's relationship with the crankshaft reluctor wheel
* CKP sensor