Brake Pedal Assy: Service and Repair

Brake Pedal Assembly Replacement

Removal Procedure

1. Remove the steering column. Refer to Steering Column Replacement (Steering Column Replacement).
2. Disconnect the stoplamp switch electrical connectors.




3. Remove the brake booster pushrod retainer (1).




4. Remove the brake booster pushrod clevis pin (1).




5. Remove the upper brake pedal bracket bolts (1).




6. Remove the power vacuum brake booster nuts (1).




7. Remove the brake pedal assembly (1).

Installation Procedure




1. Install the brake pedal assembly (1).

Caution: Refer to Fastener Caution (Fastener Caution).




2. Install the power vacuum brake booster nuts (1) and tighten to 20 Nm (15 lb ft).




3. Install the upper brake pedal bracket bolts (1) and tighten to 27 Nm (20 lb ft.




4. Install the brake booster pushrod clevis pin (1) to the pushrod and the brake pedal.




5. Install the brake booster pushrod retainer (1).
6. Connect the stoplamp switch electrical connectors.
7. Install the steering column. Refer to Steering Column Replacement (Steering Column Replacement).