Rear Axle Lubricant Replacement (8.6 Inch Axle)

Rear Axle Lubricant Replacement (8.6 Inch Axle)

Removal Procedure

1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (Service and Repair).
2. Clean the area around the rear axle fill plug.




3. Remove the rear axle fill plug.
4. Remove the rear axle cover. Refer to Rear Axle Housing Cover and Gasket Replacement (Service and Repair).
5. Drain the lubricant into a suitable container.

Installation Procedure

1. Install the rear axle cover. Refer to Rear Axle Housing Cover and Gasket Replacement (Service and Repair).
2. Fill the rear axle with axle lubricant. Use the proper fluid. Refer to Approximate Fluid Capacities (Service Intervals) and Adhesives, Fluids, Lubricants, and Sealers (Fluid Type Specifications).





Caution: Refer to Fastener Caution (Fastener Caution) /.

3. Install the rear axle fill plug and tighten to 33 Nm (24 lb ft).
4. Remove the support and lower the vehicle.