Instrument Panel, Gauges and Warning Indicators: Service and Repair

Accessory Switch Replacement

Removal Procedure

1. Remove the instrument panel (I/P) accessory trim plate. Refer to Instrument Panel Accessory Trim Plate Replacement (Service and Repair).




2. Remove the fasteners retaining the switch to the trim plate.




3. Remove the switch from the trim plate.

Installation Procedure




1. Install the switch to the trim plate.





Caution: Refer to Fastener Caution (Fastener Caution).

2. Install the fasteners retaining the switch to the trim plate.

Tighten the fastener to 2.5 Nm (22 lb in).

3. Install the I/P accessory trim plate. Refer to Instrument Panel Accessory Trim Plate Replacement (Service and Repair).