77. Camshaft Cover Installation

Camshaft Cover Installation




1. Install a new camshaft cover seal.

Caution: Refer to Fastener Caution (Fastener Caution).

2. Install the camshaft cover and bolts and tighten to 10 Nm (89 lb in).




3. Install new ignition control module seals.
4. Install the ignition control modules and bolts and tighten to 10 Nm (89 lb in).




5. Add sealer GM P/N 12346004 (Canadian P/N 10953480) to the coolant temperature sensor threads.
6. Install the coolant temperature sensor and tighten to 14 Nm (124 lb in).