Liftgate Control Module Replacement

Liftgate Control Module Replacement

Removal Procedure

1. Remove the liftgate trim panel. Refer to Liftgate Trim Panel Replacement (Service and Repair).




2. Disconnect the electrical connectors (3) from the module as necessary.
3. Remove the bolts that retain the module to the liftgate.
4. Remove the module from the liftgate.

Installation Procedure




1. Install the module to the liftgate.

Caution: Refer to Fastener Caution (Fastener Caution).

2. Install the bolts that retain the module to the liftgate and tighten to 10 Nm (89 lb in).
3. Connect the electrical connectors (3) as necessary.
4. Install the liftgate trim panel. Refer to Liftgate Trim Panel Replacement (Service and Repair).
5. Program the liftgate control module. Refer to Control Module References (Programming and Relearning).