Instrument Panel Cluster Trim Plate Bezel Replacement

Instrument Panel Cluster Trim Plate Bezel Replacement (GMC)

Removal Procedure

1. Tilt the steering wheel to the full down position.
2. Remove the left closeout/insulator panel. Refer to Instrument Panel Insulator Panel Replacement - Left Side (Service and Repair).
3. Remove the knee bolster trim panel. Refer to Driver Knee Bolster Panel Replacement (Service and Repair).




4. Remove the screws that retain the bezel to the instrument panel.
5. Remove the bezel from the instrument panel.

Installation Procedure




1. Install the bezel to the instrument panel.

Caution: Refer to Fastener Caution (Fastener Caution).

2. Install the screws that retain the bezel to the instrument panel.

Tighten the screws to 2.5 Nm (22 lb in).

3. Install the knee bolster trim panel. Refer to Driver Knee Bolster Panel Replacement (Service and Repair).
4. Install the left closeout/insulator panel. Refer to Instrument Panel Insulator Panel Replacement - Left Side (Service and Repair).